logo
προϊόντα
λεπτομέρειες για τα προϊόντα
Σπίτι > προϊόντα >
IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

Τροποποιημένο: 1
τιμή: Customized
Τυπική συσκευασία: πακέτο εξαγωγής
Περίοδος παράδοσης: 5 ημέρες
Μέθοδος πληρωμής: T/t
Ικανότητα εφοδιασμού: 100 σύνολα το μήνα
Πληροφορίες λεπτομέρειας
Τόπος καταγωγής
Κίνα
Μάρκα
Sinuo
Πιστοποίηση
Calibration Certificate(Cost Additional )
Αριθμό μοντέλου
ΣΕ446Β
Πρότυπα συμμόρφωσης:
IEC 60529-2013 Εικόνα 5
Κώδικας IP:
IPX3 και IPX4
Σχέδιο ακροφυσίων:
121 τρύπες (Ø0.5mm)
Υλικό ακροβωτίου:
Ορείχαλκος
Ροή νερού:
10L/λεπτό ± 5%
Κλίμακα πίεσης:
50~150Kpa
Περιγραφή του προϊόντος

 

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

 

 

Product information:

 

It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5.

The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.

 

Technical parameters:

 

Spray Nozzle Dimensions:Outer Ø102mm, spherical Ø75.5mm
Holes:121 (1 center, 2 inner rings of 12 holes @30°, 4 outer rings of 24 holes @15°), all Ø0.5mm
Material:Brass
Water Flow 10L/min ±5% (adjustable via flow meter)
Pressure 50–150 kPa (gauge range: 0–0.25 MPa)
Moving Shield

Material: Aluminum (detachable)

Note: Handle with care to avoid deformation

 

 

Structure:

 

This device is manufactured in accordance with IEC 60529, Figure 5. Equipped with a digital flowmeter and a handle-mounted pressure gauge, it enables IPX3/IPX4 hand-held spray testing when connected to a water pipe (to be provided by the user). By regulating the water supply flow, the system ensures that the spraying and splashing rate meets the standard requirements, allowing the specimen’s enclosure to be uniformly splashed from all directions.

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 0IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 1

Συνιστώμενα προϊόντα
IPX5 IPX6 Water Jet Test System For Waterproof Rating IEC 60529 Βίντεο
προϊόντα
λεπτομέρειες για τα προϊόντα
IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5
Τροποποιημένο: 1
τιμή: Customized
Τυπική συσκευασία: πακέτο εξαγωγής
Περίοδος παράδοσης: 5 ημέρες
Μέθοδος πληρωμής: T/t
Ικανότητα εφοδιασμού: 100 σύνολα το μήνα
Πληροφορίες λεπτομέρειας
Τόπος καταγωγής
Κίνα
Μάρκα
Sinuo
Πιστοποίηση
Calibration Certificate(Cost Additional )
Αριθμό μοντέλου
ΣΕ446Β
Πρότυπα συμμόρφωσης:
IEC 60529-2013 Εικόνα 5
Κώδικας IP:
IPX3 και IPX4
Σχέδιο ακροφυσίων:
121 τρύπες (Ø0.5mm)
Υλικό ακροβωτίου:
Ορείχαλκος
Ροή νερού:
10L/λεπτό ± 5%
Κλίμακα πίεσης:
50~150Kpa
Ποσότητα παραγγελίας min:
1
Τιμή:
Customized
Συσκευασία λεπτομέρειες:
πακέτο εξαγωγής
Χρόνος παράδοσης:
5 ημέρες
Όροι πληρωμής:
T/t
Δυνατότητα προσφοράς:
100 σύνολα το μήνα
Περιγραφή του προϊόντος

 

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

 

 

Product information:

 

It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5.

The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.

 

Technical parameters:

 

Spray Nozzle Dimensions:Outer Ø102mm, spherical Ø75.5mm
Holes:121 (1 center, 2 inner rings of 12 holes @30°, 4 outer rings of 24 holes @15°), all Ø0.5mm
Material:Brass
Water Flow 10L/min ±5% (adjustable via flow meter)
Pressure 50–150 kPa (gauge range: 0–0.25 MPa)
Moving Shield

Material: Aluminum (detachable)

Note: Handle with care to avoid deformation

 

 

Structure:

 

This device is manufactured in accordance with IEC 60529, Figure 5. Equipped with a digital flowmeter and a handle-mounted pressure gauge, it enables IPX3/IPX4 hand-held spray testing when connected to a water pipe (to be provided by the user). By regulating the water supply flow, the system ensures that the spraying and splashing rate meets the standard requirements, allowing the specimen’s enclosure to be uniformly splashed from all directions.

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 0IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 1

Sitemap |  Πολιτική απορρήτου | Κίνα Καλό Ποιότητα Ηλεκτρικός εξοπλισμός δοκιμής συσκευών Προμηθευτής. 2019-2025 Sinuo Testing Equipment Co. , Limited . Όλοι Δικαιώματα που διατηρούνται.