logo
προϊόντα
λεπτομέρειες για τα προϊόντα
Σπίτι > προϊόντα >
IEC 60335 Hotplate Test Vessel Set Aluminum Pots With Lids 5 Sizes

IEC 60335 Hotplate Test Vessel Set Aluminum Pots With Lids 5 Sizes

Τροποποιημένο: 1
τιμή: Διαπραγματεύσιμα
Τυπική συσκευασία: Χαρτοκιβώτιο
Περίοδος παράδοσης: 20 ημέρες
Μέθοδος πληρωμής: T/t
Ικανότητα εφοδιασμού: 20 σύνολα το μήνα
Πληροφορίες λεπτομέρειας
Τόπος καταγωγής
ΚΙΝΑ
Μάρκα
Sinuo
Πιστοποίηση
Calibration certificate(cost additional)
Αριθμό μοντέλου
SN1115
Μέγεθος πλοίων:
Φ110mm, Φ145mm, Φ180mm, Φ220mm, Φ300mm
Πάχος τοίχου:
2 mm
Μέγιστο Concavity:
≦ 0.006d, να μην είναι κυρτό
Σχήμα σκάφους:
Επίπεδη βάση, με κάλυμμα, κύλινδρο
Υλικό σκαφών:
6061 Αλουμίνιο
Λειτουργία σκαφών:
Να σιγοβράσει νερού δοκιμή
Επισημαίνω:

IEC 60335 hotplate test vessel set

,

aluminum test pots with lids

,

electrical testing equipment 5 sizes

Περιγραφή του προϊόντος
IEC 60335 Hotplate Test Vessel Set Aluminum Pots With Lids 5 Sizes
Product Information

This test vessel set conforms to the standard requirements of IEC 60335-2-6:2018 clause 3.1.9.101 figure 101 and IEC60335-2-9 clause 3.1.9.108 & 15.2 figure 103. The set includes 5 aluminum pots with lids in sizes: 110mm, 145mm, 180mm, 220mm, and 300mm.

Designed for testing hotplates (excluding induction models), these vessels feature:

  • Unpolished commercial quality aluminum construction
  • Flat bottom design
  • Included lids for each pot
  • Precise dimensions matching standard requirements
Note: The lid is positioned to prevent steam from affecting test results. Vessels are positioned centrally on cooking zones during testing.
Technical Parameters
Diameter of cooking zone (mm) Approximate dimension a (mm) Approximate dimension b (mm) Approximate dimension c (mm)
≤110 110 140 8
>110≤145 145 140 8
>145≤180 180 140 9
>180≤220 220 120 10
>220≤300 300 100 10
The maximum concavity of the vessel must not exceed 0.05 mm. The base of the vessel must not be convex.
Actual Inspection Dimensions
Outer diameter a (mm) b (mm) c (mm) Material With lid
110 2 8.05 AL6061 With lid
145 1.9 8.04 AL6061 With lid
180 1.925 8.98 AL6061 With lid
220 1.995 9.99 AL6061 With lid
300 1.999 10.02 AL6061 With lid
Συνιστώμενα προϊόντα
προϊόντα
λεπτομέρειες για τα προϊόντα
IEC 60335 Hotplate Test Vessel Set Aluminum Pots With Lids 5 Sizes
Τροποποιημένο: 1
τιμή: Διαπραγματεύσιμα
Τυπική συσκευασία: Χαρτοκιβώτιο
Περίοδος παράδοσης: 20 ημέρες
Μέθοδος πληρωμής: T/t
Ικανότητα εφοδιασμού: 20 σύνολα το μήνα
Πληροφορίες λεπτομέρειας
Τόπος καταγωγής
ΚΙΝΑ
Μάρκα
Sinuo
Πιστοποίηση
Calibration certificate(cost additional)
Αριθμό μοντέλου
SN1115
Μέγεθος πλοίων:
Φ110mm, Φ145mm, Φ180mm, Φ220mm, Φ300mm
Πάχος τοίχου:
2 mm
Μέγιστο Concavity:
≦ 0.006d, να μην είναι κυρτό
Σχήμα σκάφους:
Επίπεδη βάση, με κάλυμμα, κύλινδρο
Υλικό σκαφών:
6061 Αλουμίνιο
Λειτουργία σκαφών:
Να σιγοβράσει νερού δοκιμή
Ποσότητα παραγγελίας min:
1
Τιμή:
Διαπραγματεύσιμα
Συσκευασία λεπτομέρειες:
Χαρτοκιβώτιο
Χρόνος παράδοσης:
20 ημέρες
Όροι πληρωμής:
T/t
Δυνατότητα προσφοράς:
20 σύνολα το μήνα
Επισημαίνω

IEC 60335 hotplate test vessel set

,

aluminum test pots with lids

,

electrical testing equipment 5 sizes

Περιγραφή του προϊόντος
IEC 60335 Hotplate Test Vessel Set Aluminum Pots With Lids 5 Sizes
Product Information

This test vessel set conforms to the standard requirements of IEC 60335-2-6:2018 clause 3.1.9.101 figure 101 and IEC60335-2-9 clause 3.1.9.108 & 15.2 figure 103. The set includes 5 aluminum pots with lids in sizes: 110mm, 145mm, 180mm, 220mm, and 300mm.

Designed for testing hotplates (excluding induction models), these vessels feature:

  • Unpolished commercial quality aluminum construction
  • Flat bottom design
  • Included lids for each pot
  • Precise dimensions matching standard requirements
Note: The lid is positioned to prevent steam from affecting test results. Vessels are positioned centrally on cooking zones during testing.
Technical Parameters
Diameter of cooking zone (mm) Approximate dimension a (mm) Approximate dimension b (mm) Approximate dimension c (mm)
≤110 110 140 8
>110≤145 145 140 8
>145≤180 180 140 9
>180≤220 220 120 10
>220≤300 300 100 10
The maximum concavity of the vessel must not exceed 0.05 mm. The base of the vessel must not be convex.
Actual Inspection Dimensions
Outer diameter a (mm) b (mm) c (mm) Material With lid
110 2 8.05 AL6061 With lid
145 1.9 8.04 AL6061 With lid
180 1.925 8.98 AL6061 With lid
220 1.995 9.99 AL6061 With lid
300 1.999 10.02 AL6061 With lid
Sitemap |  Πολιτική απορρήτου | Κίνα Καλό Ποιότητα Ηλεκτρικός εξοπλισμός δοκιμής συσκευών Προμηθευτής. 2019-2025 Sinuo Testing Equipment Co. , Limited . Όλοι Δικαιώματα που διατηρούνται.